Equipment · Hire companies · 8 states & territoriesIndependent Australian plant hire directory
Machine selector
Equipment hire · 67 suppliers

Crane hire Australia

Choose a crane from the load, radius and set-up area, not from the headline capacity on the machine. A 100 t crane can lift far less than 100 t at working radius.

Specify the work

What load must move between which two positions?

Build a useful equipment enquiry
Work requirementDescribeAsk the supplier
Pick-upDocumented load informationProvide mass, dimensions and lifting-point information.
PlacementHeight, radius and obstaclesSend a marked plan for competent lift planning.
Set-upStanding area and accessIdentify who establishes ground and support requirements.

A directory enquiry is not a lift plan. A crane's headline capacity does not establish capacity at the required radius or approve the supporting ground.

Read the detailed planning guide →

What crane can you hire?

Crane Hire in Australia covers a range of machine types and sizes. These are the most commonly hired, and what each is typically used for:

MachineTypical use
Franna / pick-and-carry cranesQuick set-up lifts, steel placement and moving loads around a site
City & all-terrain cranesTight urban sites, HVAC units, precast and roof trusses
Slewing mobile cranes (50–500 t+)Heavy lifts, bridge beams and industrial installation
Crawler cranesLong-duration heavy lifting, piling and wind farm work
Truck-mounted (Hiab) cranesDeliver-and-place of materials, containers and site sheds
Tower cranesMulti-storey construction over long programmes

Before you request a quote

A useful enquiry tells the supplier what has to be achieved, where the equipment will work and what could change the selection. Include dimensions, quantities, material conditions, dates, the delivery route, unloading area and any site compliance requirements.

Compare offers on the complete configuration: machine, attachments, operator (for wet or dry hire), transport both ways, minimum hours, fuel and return conditions. See how to read a plant hire quote.

Selection factors

Three things that change the answer.

01

Load weight and geometry

Include rigging, spreader bars and attachments in the lift weight, and describe the load's size and centre of gravity.

02

Radius and height

Radius from the crane's centre to the load's final position controls capacity. Measure it on a site plan.

03

Ground bearing and exclusion zones

Outrigger loads, underground services, power lines and public areas determine the set-up, and often the crane size.

Crane Hire companies

67 suppliers to compare.

Filter by state →
See all 67 crane suppliers →
FAQ

Crane hire questions.

What is a Franna crane?

A Franna is an Australian pick-and-carry crane that can travel with a load on its hook. It's widely used for quick lifts, steel erection and moving materials around a site.

What's the difference between dry and wet crane hire?

Most mobile crane hire in Australia is wet (operated) hire, supplied with a licensed crane operator and often a dogman or rigger. Dry crane hire is uncommon outside some smaller truck-mounted units.

Do I need a lift plan?

Many sites and principal contractors require a lift plan, especially for heavy, complex or public-interface lifts. Crane companies can often prepare one.

How is crane hire charged?

Usually hourly with a minimum call-out (often 3–4 hours), plus travel, rigging crew, permits, escorts and any additional counterweight transport.