Equipment · Hire companies · 8 states & territoriesIndependent Australian plant hire directory
Machine selector
Project guide · Earthmoving Equipment

Bulk earthworks equipment hire guide

Excavate, load, haul, place and trim material as one production system. The goal: balanced production across excavation, haul and placement.

Specify the work

Are you digging, moving loose material or shaping the finished surface?

Build a useful equipment enquiry
Work requirementDescribeAsk the supplier
ExcavationDepth, reach and materialAsk about the bucket or attachment and spoil-loading position.
Loading and spreadingStockpile, travel and discharge pointsCompare the complete material movement, including support vehicles.
TrimmingFinished levels and acceptanceState tolerances and who checks the result.

A larger machine can lose its advantage if it cannot reach the work or must wait for trucks. Ask for a configuration against the task, rather than using nominal tonnage as the whole specification.

Read the detailed planning guide →
Sequence of work

Four stages.

01

Survey & set-out

Confirm cut/fill volumes, material types from the geotech report, haul routes, stockpile areas and environmental controls.

02

Excavate & load

Size the excavator to the truck fleet so loading and haul cycles match. Plan for rock-breaking or ripping if the geotech report calls for it.

03

Place & compact

Spread in specified layers, bring the fill to the right moisture with water carts, and compact to the density the testing regime requires.

04

Trim & verify

Trim to design levels with graders or machine-controlled dozers, then survey and test before handover.

Typical fleet

0120–30 t excavators
02Articulated dump trucks or tippers
03Dozers
04Padfoot and smooth drum rollers
05Water carts
06Graders for trim

Build the request around the outcome

Describe the finished work, quantities and programme before you lock in a machine. A supplier can only judge suitability when the brief includes material conditions, access, operating space, delivery constraints and the expected work pattern. Treat attachments and supporting plant as part of one production system.

Compare rates with transport, minimum hours, operators, fuel, service response and return requirements all visible. For regional work, find out where the proposed unit is now.

Earthmoving Equipment Hire →

Earthmoving Equipment Hire

Suppliers for this job.

All suppliers →